 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RB160M-40 Diodes Schottky barrier diode RB160M-40 Applications General rectification Dimensions (Unit : mm) 1.60.1 0.10.1 0.05 Land size figure (Unit : mm) 1.2 0.85 2.60.1 3.50.2 Features 1) Small power mold type. (PMDS) 2) Low IR. 3) High reliability. PMDU Structure Construction Silicon epitaxial planar 0.90.1 ROHM : PMDU JEDEC :SOD-123 Manufacture Date 0.80.1 Taping specifications (Unit : mm) 4.00.1 2.00.05 1.550.05 1.750.1 0.250.05 3.50.05 8.00.2 1.810.1 4.00.1 1.00.1 3.710.1 1.5MAX Absolute maximum ratings (Ta=25C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current Forward current surge peak (60Hz1cyc) Junction temperature Storage temperature Symbol VRM VR Io IFSM Tj Tstg Limits 40 40 1 30 150 -40 to +150 Unit V V A A (*1)Mounted on epoxy board. 180Half sine wave Electrical characteristics (Ta=25C) Parameter Symbol Forward voltage Reverse current VF IR Min. - Typ. 0.46 4.0 Max. 0.51 30 Unit V A Conditions IF=1.0A VR=40V Rev.E 3.05 1/3 RB160M-40 Diodes Electrical characteristic curves (Ta=25C) 1000 Ta=75 FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(uA) Ta=125 100 Ta=150 Ta=25 10 Ta=-25 10000 1000 100 10 1 0.1 0.01 0.001 0 5 10 15 20 25 30 35 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 40 Ta=-25 Ta=25 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=75 100 Ta=125 1000 f=1MHz 10 1 0 100 200 300 400 500 600 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 1 0 5 10 15 20 25 30 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 480 FORWARD VOLTAGE:VF(mV) 470 460 450 AVE:454.3mV 440 430 VF DISPERSION MAP Ta=25 VF=1A n=30pcs 30 REVERSE CURRENT:IR(uA) 25 20 15 10 5 0 IR DISPERSION MAP AVE:4.08uA Ta=25 VR=40V n=30pcs 300 290 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 280 270 260 250 240 230 220 210 200 AVE:279.7pF Ta=25 f=1MHz VR=0V n=10pcs Ct DISPERSION MAP 200 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 150 8.3ms 100 1cyc RESERVE RECOVERY TIME:trr(ns) 30 25 20 15 10 5 0 IFSM DISRESION MAP trr DISPERSION MAP AVE:10.4ns PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25 IF=0.5A IR=1A Irr=0.25*IR n=10pcs 100 80 60 40 Ifsm 20 0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 8.3ms 8.3ms 1cyc 50 AVE:83.0A 0 200 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 150 t 1000 Mounted on epoxy board IM=10mA IF=0.5A 1 Rth(j-a) TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 0.9 0.8 FORWARD POWER DISSIPATION:Pf(W) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Sin(180) DC D=1/2 100 1ms time 300us Rth(j-c) 10 100 50 1 0 0.1 1 10 100 TIME:t(ms) IFSM-t CHARACTERISTICS 0.1 0.001 0.01 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1 10 100 1000 0 0.5 1 1.5 AVERAGE RECTIFIED FORWARD CURRENTIo(A) Io-Pf CHARACTERISTICS 2 Rev.E 2/3 RB160M-40 Diodes 0.05 0.04 REVERSE POWER DISSIPATION:PR (W) 0.03 DC 0.02 0.01 0 0 10 20 30 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 40 D=1/2 Sin(180) 3 3 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0A 0V DC D=1/2 Io t T VR D=t/T VR=20V Tj=150 2.5 2 1.5 D=1/2 1 0.5 0 0 25 50 75 100 125 150 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 2.5 0A 0V DC Io t T VR D=t/T VR=20V Tj=150 2 1.5 1 0.5 Sin(180) Sin(180) 0 25 50 75 100 125 150 0 AMBIENT TEMPERATURE:Ta() Derating Curve(Io-Ta) CASE TEMPARATURE:Tc() Derating Curve(Io-Tc) 30 No break at 30kV ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 20 15 10 5 AVE:7.30kV 0 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP Rev.E 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0 |
Price & Availability of RB160M-402
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |